OKIMAT 300
Extra-compact double drive for smooth adjustment of seating and bedding furniture. Durable, efficient worm gear with high-performance self-locking function. Possible connection of an additional OKIMAT 300 or 2 single drives. Heating and vibration can be used.
- Load capacity: max. 4000 N on each side (for safety reasons, no pull force)
- Adjustment speed: max. 3.5 mm/sec. *
- Control unit: relay circuit
- Connection options: connections for operating elements: 1
- Equipment options: emergency lowering via 9 V battery on models with no mains cut-off, control unit integrated in housing, Hall sensor for external control
Standard configurations
|
Performance data |
|
|---|---|
|
Load capacity |
max. 4000 N on each side (for safety reasons, no pull force) |
|
Adjustment speed 1 |
max. 3.5 mm/sec. |
|
Stroke length |
back rest: 50 / 55 / 59 / 69 / 74 / 87 / 92 mm leg rest: 55 / 69 / 74 / 87 / 92 mm |
|
Fitting dimension |
installation length: 440 mm component height: 162 mm axle distance: 300 mm (+/- 2 mm) axle diameter: 25 mm |
|
Duty cycle |
2/18 min. or 10 %, max. 5 switching cycles per minute |
|
Control unit |
relay-free control |
|
Motor voltage |
maintenance-free 24 V DC motor |
|
Components |
|
|
Limit switch |
with micro switch |
|
Housing colour |
black RAL 9005 |
|
Supply cable |
EURO-plug, black RAL 9017, with OKIN mains free isolation, straight, 3500 mm EURO-plug, black RAL 9017, straight, 4000 mm |
|
Transformer / Transformer type |
50 VA |
|
Further data |
|
|
Connectivity 2 |
1-2 additional single drives or 1 further OKIMAT 300 1 handset or 1 remote control |
|
Protection type |
IP20 |
|
Protection class |
II |
|
Relative humidity |
30% – 75% |
|
Ambient temperature |
+10°C - +40°C |
|
Power supply |
100 V AC, 120 V AC, 230 V AC, 240 V AC |
Extra configurations
|
Performance data |
|
|---|---|
|
Control unit |
relay control |
|
Position feedback |
Hall sensor for external control |
|
Further data |
|
|
Quick release / Retracting function 3 |
emergency lowering via 9 V battery on models with no mains cut-off |
|
Mains isolation |
yes |
|
Equipment options |
control unit integrated in housing |
1 depending on the drive configuration and the control components which are used
2 (example, depending on control unit type)
3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.
