GIGAMAT
The drive solution for high loads
The GIGAMAT is designed for extreme loads. This stable high-performance drive provides significantly more mechanical power than comparable solutions. The single drive provides a high push force of up to 10,000 Newton and a pull force of up to 7,000 Newton. Its adjustment speed is 19.3 mm/s with a stroke length of 550 mm. Thanks to its characteristics, the heavy-duty drive is especially well-suited for lifter applications that are designed for severely overweight patients.
Versatile and efficient
Users also benefit from many configuration options of the GIGAMAT. The drive can be equipped with an adjustable gear clevis (only for pull-drives up to max. 1,000 N), an additional limit switch and a potentiometer.
Advantages at a glance
- Very stable heavy-duty drive
- High push and pull forces
- Manual emergency lowering
- High IP protection class
- Especially well-suited for lifter applications
- Load capacity: max. 10000 N push / max. 7000 N pull
- Adjustment speed: max. 19.3 mm/sec. *
- Stroke length: max. 550 mm
- Equipment options: adjustable gear clevis (only for pull-drives up to max. 1000 N), additional limit switch, potentiometer
Standard configurations
|
Performance data |
|
|---|---|
|
Load capacity |
max. 10000 N push max. 7000 N pull |
|
Adjustment speed 1 |
max. 19.3 mm/sec. |
|
Stroke length |
max. 550 mm |
|
Fitting dimension (B) 2 |
210 mm + stroke |
|
Duty cycle |
2/18 min. or 10 %, max. 5 switching cycles per minute |
|
Motor voltage |
maintenance-free 24 V DC motors |
|
Components |
|
|
Limit switch |
with micro switch |
|
Stroke pipe clevis |
drill hole: 10 mm recess: 5/8 mm |
|
Gear clevis |
die cast zinc drill hole: 10 mm recess: 5/8 mm |
|
Stroke pipe |
stainless steel |
|
Guidance profile |
aluminum untreated |
|
Housing colour |
light grey RAL 7035 |
|
Motor connecting line |
grey, straight, 300 mm, LSP-plug, PVC grey, straight, 830 mm, LSP-plug, PVC |
|
Further data |
|
|
Protection type |
max. IPX6 |
|
Protection class |
III |
|
Relative humidity |
30% - 75% |
|
Ambient temperature |
+10°C - +40°C |
Extra configurations
|
Components |
|
|---|---|
|
Position feedback |
potentiometer |
|
Clevis |
adjustable gear clevis (only for pull drives up to max. 1000 N) |
|
Motor connecting line |
pluggable |
|
Further data |
|
|
Quick release / Retracting function 3 |
mechanical retracting function up to max. 10000 N (only for push drives), special mechanical retracting system for patient lifter |
|
Equipment options |
additional limit switch |
1 depending on drive configuration at constant 24/29 V DC without load
2 see technical drawings
3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.
