DUOMAT 8

Versatile double drive for nursing and hospital beds


The DUOMAT 8 is the successor of the DUOMAT 7. The double drive is equipped with SMPS and plug-in power cord. This means the device is suitable for global use. The housing not only has a modern design, but also delivers increased mechanical stability. Other advantages: The DUOMAT 8 can be easily mounted and has a high protection level. Thanks to its characteristics, the double drive is perfectly suited for combined head and back section adjustment. The adjustment load is up to max. 4,500 Newton per side. The adjustment speed is up to max. 6.5 mm/sec – depending on the drive configuration at a constant 24/29 V DC and no load.


Many configuration options


The special feature of the DUOMAT 8: Its many configuration options make the drive even more efficient and versatile. The configuration options include: electrical reset function (9V battery), rechargeable battery, mains cut-off mechanism, synchronous control unit, externally-mounted floor lighting system, Hall sensor, microprocessor controlled FURNIBUS and toroidal transformer with 155 VA.


Advantages at a glance

  • Compact and stable construction
  • Integrated SMPS
  • Perfectly suited for combined head and back section adjustment
  • Easy assembly
  • High IP protection class
  • Load capacity: max. 4500 N on each side (for safety reasons, no pull force)
  • Adjustment speed: max. 6.5 mm/sec. *
  • Power unit type: SMPS
  • Integrated battery holder. Anti-plug-removal device
  • Equipment options: electrical retracting function (9 V block battery), rechargeable battery operation, mains cut-off, synchronous control unit, floor lighting system fittable from outside, Hall sensor, microprocessor control FURNIBUS, toroidal transformer 155 VA
* depending on drive configuration at constant 24/29 V DC without load

Standard configurations

Performance data

Load capacity

max. 4500 N on each side (for safety reasons, no pull force)

Adjustment speed 1

max. 6.5 mm/sec.

Stroke length

back rest: 87 mm
leg rest: 69 mm

Fitting dimension

installation length: 714 mm
component height: 119 mm
axle distance: 581 mm (+/- 3 mm)
axle diameter: 25 mm

Duty cycle

2/18 min. or 10 %, max. 5 switching cycles per minute

Control unit

relay control

Motor voltage

maintenance-free 24 V DC motor

Components

Limit switch

with micro switch

Housing colour

light grey RAL 7035

Supply cable

pluggable:
GB-plug, grey, spiralled, 1960 mm, PVC
GB-plug, grey, spiralled, 2460 mm, PVC
GB-plug with earthing, grey, spiralled, 1960 mm, PVC
USA-plug, grey, straight, 4000 mm, PVC
USA-plug with earthing, grey, straight, 4000 mm, PVC
AUS-plug, grey, spiralled, 1960 mm, PVC
AUS-plug with earthing, grey, spiralled, 1960 mm, PVC
JAP-plug, grey, straight, 4000 mm, PVC
JAP-plug with earthing, grey, straight, 4000 mm, PVC
earthing pin plug, grey, straight, 3000 mm, PVC
earthing pin plug, grey, spiralled, 1960 mm, PVC
contour plug, grey, spiralled, 1960 mm, PVC

SMPS

yes

Further data

Connectivity 2

connections for drives 2
connections for rechargeable battery: 1
connections for operating elements: 1
connections for locking device: 1

Protection type

IPX4

Protection class

II

Relative humidity

30% – 75%

Ambient temperature

+10°C - +40°C

Power supply

wide input voltage range 100-240 V AC

Safety

single-fault protected

Extra configurations

Performance data

Fitting dimension

axis diameter: 34 mm

Control unit

microprocessor control "FURNIBUS", synchronous control unit

Components

Position feedback

Hall sensor

Transformer / Transformer type

toroidal transformer 155 VA

Further data

Quick release / Retracting function 3

electrical retracting function (9 V block battery)

Equipment options

rechargeable battery operation, floor lighting system fittable from outside

Certificate

60601-1 3rd Edition

1 depending on the drive configuration and the control components which are used

2 (example, depending on control unit type)

3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

Find out more »
OUR BRANDS
contact Contact