DUOMAT 3

Versatile drive solution for head and back section adjustment


The DUOMAT 3 is a standardised double drive for the EASY DRIVE- drive system with an externally mounted SMPS. Users benefit from the compact and stable design, the high IP protection and the ease of assembly of the device. Thanks to its characteristics, the double drive is especially well-suited for the combined head and back section adjustment.
The adjustment load is up to max. 3,500 Newton per side. The adjustment speed is up to max. 3.9 mm/sec – depending on the drive configuration at a constant 24/29 V DC and no load. On request, the drive can be equipped with a 2 x 9V battery.


Advantages at a glance

  • Compact and stable construction
  • Perfectly suited for combined head and back section adjustment
  • Easy assembly
  • High IP protection class
  • Load capacity: max. 3500 N on each side (for safety reasons, no pull force)
  • Adjustment speed: max. 3.9 mm/sec. *
  • Equipment options: 2 x 9 V battery
* depending on drive configuration at constant 24/29 V without load

Standard configurations

Performance data

Load capacity

max. 3500 N on each side (for safety reasons, no pull force)

Adjustment speed 1

max. 3.9 mm/sec.

Stroke length

back rest: 69 / 87 mm
leg rest: 69 / 87 mm

Fitting dimension

installation length: 708 mm
component height: 120 mm
axle distance: 581 mm (+/- 2 mm)
axle diameter: 25 mm

Duty cycle

2/18 min. or 10 %, max. 5 switching cycles per minute

Control unit

relay control

Motor voltage

maintenance-free 24 V DC motor

Components

Limit switch

with micro switch

Housing colour

light grey RAL 7035

Connection cable

black, straight, 2350 mm, LSP-plug, PVC

SMPS

external SMPS PD 14 / PD 15

Further data

Connectivity 2

2 slave drives
1 handset

Protection type

IPX4

Protection class

III

Relative humidity

30% – 75%

Ambient temperature

+10°C - +40°C

Power supply

wide input voltage range 100-240 V AC (external SMPS PD 14/PD 15)

Safety

single-fault protected

Extra configurations

Further data

Quick release / Retracting function 3

2 x 9 V battery

1 depending on the drive configuration and the control components which are used

2 (example, depending on control unit type)

3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

Find out more »
OUR BRANDS
contact Contact