UNOMAT
This single drive operating on the principle of double drives offers motorised back rest adjustment for slatted frames. Complies with the eco-design directive (standby power consumption < 0.5 W) with external SMPS.
- Load capacity: max. 3500 N (for safety reasons, no pull force)
- Adjustment speed: max. 4.2 mm/sec. *
- Equipment options: connection possibility for a further UNOMAT
Standard configurations
|
Performance data |
|
|---|---|
|
Load capacity |
max. 3500 N (for safety reasons, no pull force) |
|
Adjustment speed 1 |
max. 4.2 mm/sec. |
|
Stroke length |
back rest: 81 mm |
|
Fitting dimension |
installation length: 351 mm component height: 109 mm axle diameter: 25 mm |
|
Duty cycle |
2/18 min. or 10 %, max. 5 switching cycles per minute |
|
Control unit |
relay-free control |
|
Motor voltage |
maintenance-free 24 V DC motors |
|
Components |
|
|
Limit switch |
with micro switch |
|
Housing colour |
black RAL 9005 |
|
Transformer / Transformer type |
external SMPS |
|
Further data |
|
|
Connectivity 2 |
1 slave drive 1 handset or 1 handheld transmitter |
|
Protection type |
IP20 |
|
Protection class |
II |
|
Relative humidity |
30% – 75% |
|
Ambient temperature |
+10°C - +40°C |
Extra configurations
|
Further data |
|
|---|---|
|
Equipment options |
connection possibility for a further UNOMAT |
1 depending on the drive configuration and the control components which are used
2 (example, depending on control unit type)
OUR BRANDS
© 2024 Phoenix Mecano Ltd.
