RK Rose+Krieger has expanded its support arm system for its RK monitor mounting with a telescopic support arm (basic length: 495 mm). In its extended state (720 mm), it is designed for monitors, display devices and operating terminals weighing up to 5 kg. With its new swivel arm, RK Rose+Krieger expands its combination options and enables greater ergonomic adaptation of end devices to the working environment.Read more »
RK Rose+Krieger has expanded its EP(X)-II twin tube units by adding a size 30 version. Higher precision and lower tolerances of the mounting surfaces to one another are the key features that characterise the new improved version of the EP/EPX
for the occasional through to the frequent movement and positioning of medium to high loads in any assembly position. The robust twin tube unit compensates for high bending moments during manual and motor-driven adjustments, is compatible with its predecessors and is easier to maintain and clean. Contributing towards the ease of maintenance is the new lead nut concept: the split lead nut enables simple replacement in the case of wear and tear – no need to dismantle the linear actuator.
The redesign offers an ergonomic installation space for cables and an improved surface quality
The ROSE Systemtechnik GTN II suspension system has experienced a successful redesign. The new and improved GTN II has a better surface quality and provides a generous space for the feeding-through of various cables.
The GTN II system by ROSE Systemtechnik offers a most variable suspension system for stationary control systems. Due to the wide variety of components such as angles, wall and mounting hinges, intermediate joints, couplings and foot stands, the system is easily adaptable to all kinds of needs. You can choose between two assembly stages: with an open or closed aluminum profile. The open profile version makes sure that the user can easily install and maintain any required material inside the profile. The system is suitable for medium to high weight control stations up to 80kg and a maximum boom length of 2m.
With its BoPad series of electronics enclosures, BOPLA has developed modern-styled enclosures for the integration of membrane keypads, touch screens and displays. The new electronics enclosure is coordinated specially to meet the requirements of mobile hand-held devices which are used in demanding conditions. However, by using BoPad enclosures, it is not only mobile devices which can catch the eye – variants for desktop applications or accessories for wall mounting are also available.Read more »
The elegant and robust electric lifting columns of the Multilift II range from RK Rose+Krieger are a great example of how customised special versions of devices can actually become standard products for specific areas of application.
The Multilift II safety is yet another version of the Multilift II lifting column that is in the pipeline. RK Rose+Krieger has developed this column specially for overhead applications in media Technology.
The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. Two different support arms/swivel arms are available, based on the load to be supported (monitor weight, torque support). The basic version has one support tube for loads of up to 10 kg , and the twin version has two support tubes for loads of up to 25 kg.Read more »
To complement its range of linear units for the medium load range, RK Rose+Krieger has now launched a new series with the RK MonoLine roller guides. The RK MonoLine is currently available in the popular sizes 40 and 80 – either with a timing-belt drive (Z) or without a drive as anti-vibration torque support (R). Further sizes are set to follow. The size 80 timing-belt-driven version can withstand loads of up to 4100 N and reaches travel speeds of up to 10 m/s, with permissible accelerations of up to 20 m/s².Read more »
In a current protection class test according to DIN EN 60529, the sturdy aluminium enclosures in BOPLA's Bocube Alu series prove that they protect sensitive electronics not only against harsh environmental conditions but also against high pressure water jets. This means that in addition to protection classes IP66 (strong water jets) and IP67 (submersion in 1 metre of water for 30 minutes), BOPLA can now also guarantee protection class IP69 for the enclosures in the Bocube Alu series.Read more »