ID 21

Elegant and convenient electric table height adjustment. The ID 21 system comes without cross bar and without visible function hole in the profile. In addition, the middle profile is entrained.

  • Load capacity: max. 800 N / 180 lbs push
  • Adjustment speed: max. 38 mm (1.49")/sec. with and without load *
  • Stroke length: 650 mm / 25.59"
  • 3-part rectangular steel column, 2-stage telescopic upwards, inner profiles move outwards
* depending on drive configuration at constant 24/29 V DC without load

Standard configurations

Performance data

Load capacity

max. 800 N / 180 lbs push

Adjustment speed 1

max. 38 mm (1.49") / sec. with and without load

Stroke length

650 mm / 25.59"

Fitting dimension

520 mm / 20.47"

Duty cycle

2/18 min. or 10 %, max. 5 switching cycles per minute

Motor voltage

maintenance-free 24 V DC motor

Components

Limit switch

below: via microswitches
above: via virtual limit switches

Housing colour

lifting column: outer/middle/inner profile: silver RAL 9006, black RAL 9005, white RAL 9016

Supply cable

1200 mm / 47.24", straight

Further data

Protection type

IP20

Protection class

III

Relative humidity

30% – 75%

Ambient temperature

+10°C - +40°C

1 depending on the drive configuration and the control components which are used

Find out more »

OUR BRANDS

Contact