MEGAMAT 4

Its great power and smooth running characterise this drive's special advantages. The many options allow it to be adapted to individual requirements.

  • Load capacity: max. 6000 N push / max. 4000 N pull
  • Adjustment speed: max. 24 mm/sec. *
  • Stroke length: max. 500 mm
  • Equipment options: stroke pipe clevis made of die cast zinc, safety limit switch, additional limit switch, safety spindle nut, Hall sensor
* depending on drive configuration at constant 24/29 V DC without load

Standard configurations

Performance data

Load capacity

max. 6000 N push
max. 4000 N pull

Adjustment speed 1

max. 24 mm/sec.

Stroke length

max. 500 mm

Fitting dimension (B) 2

min. 190 mm + stroke

Duty cycle

2/18 min. or 10 %, max. 5 switching cycles per minute

Motor voltage

maintenance-free 24 V DC motors

Components

Limit switch

with micro switch

Stroke pipe clevis

drill hole: 10/12 mm
recess: 5/8/10 mm

Gear clevis

die cast zinc
adjustable (4 x 90°)
drill hole: 10/12 mm
recess: 8 mm

Stroke pipe

aluminium anodised
stepless adjustable

Guidance profile

aluminium anodised

Housing colour

light grey RAL 7035

Motor connecting line

grey, spiralled, 455 mm, LSP-plug, PVC
grey, spiralled, 160 mm, LSP-plug, PVC
black, spiralled, 455 mm, LSP-plug, PVC
grey, straight, 1660 mm, LSP-plug, PVC, UL
black, straight, 550 mm, 8-pole DIN-plug, PVC

Further data

Protection type

max. IPX4

Protection class

III

Relative humidity

30% - 75%

Ambient temperature

+10°C - +40°C

Extra configurations

Performance data

Control type

relay-free control

Components

Position feedback

Hall sensor

Clevis

stroke pipe clevis made of die cast zinc

Stroke pipe

steel powder-coated

Motor connecting line

pluggable

Further data

Quick release / Retracting function 3

GQR in clevis up to max. 3000 N (only for push- or pull-drives)

Equipment options

safety limit switch, additional limit switch, safety spindle nut

1 depending on drive configuration at constant 24/29 V DC without load

2 see technical drawings

3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

Find out more »

OUR BRANDS

Contact